Outlander Vehicle Lifts:
Installation & Service Manual
27DEC19 | 630-00133 REV A
6
OUTLANDER VEHICLE LIFTS:
SECTION 3
PREPARATION
Section 3
Preparation
Installations may vary to some degree, but below
are the basic tools to have on hand for a Paragon
Outlander Vehicle Lift installation.
If you have any questions, concerns or comments,
please contact our Technical Service Department at
800-378-6648 or [email protected].
RECOMMENDED TOOLS
• Stripper, Crimping Tool
• Work Lights (Wired or Wireless)
• Soldering Gun/Iron
• Labeler (for Wiring)
• First Aid Kit
• Box Cutter
• Torque Wrench
REQUIRED TOOLS
• Socket Set:
• 3/8
"
• 7/16
"
• 1/2
"
• 9/16
"
• 3/4
"
• Wrench Set:
• 7/16
"
• 1/2
"
• 9/16
"
• 3/4
"
• 15/16
"
• Allen Wrench:
• 1/8
"
• 3/16
"
• 5/16
"
• Wire Cutters
• Needle Nose Pliers
• No. 2 Flat Head Screwdriver
• No. 2 Phillips Head Screwdriver
• Marking Implement
• Tape Measure
• Multimeter
UNPACKING THE LIFT
Never attempt to pick up the lift
from the box, ground or on/off a
vehicle alone.
RECOMMENDED
TORQUE TABLE
THREAD
DIAMETER
TORQUE (FT-LB)
WRENCH
SIZE
Nylon Lock Nut
Hex Nut
1/4
8
10
7/16
5/16
17
19
1/2
3/8
30
35
9/16
1/2
69
85
3/4
5/8
135
170
15/16
