Installing the Platform
Step 1
The mounting bolts, nuts and spacers that
secure the platform to the lift carriage are
packaged in the small parts box. Begin by
locating these pieces and setting aside.
Step 2
Position the platform by aligning the support
legs with the carriage flanges that protrude
from the front cover.
Step 3
Align the four mounting holes with those on
the carriage. Insert 1/2 x 3” hex head bolts into
each of the (4) holes. Install the low profile
nuts on the upper bolts and the standard ones
on the lower bolts.
.
Step 4
Plug in the harness for the platform safety
pan and unplug the safety pan jumper on the
controller (ref pg 5). Secure the harnesses
under the clip on top of the carriage flange.
6
