EMI and Flush Strike Interlocks (optional)
The optional EMI or Flush Strike Interlocks are provided
with a combination mechanical lock and electric
contact. They are to be used with existing doors.
The interlock:
•
Prevents the lift from running if the door is not
closed.
•
Prevents the door from being opened if the
platform is not at the landing.
A length of multi-conductor wire will need to be ran from
the bottom of the lift tower to each interlock. Consult
local codes for type and mounting requirements. After
wiring is completed, the wiring harness must be
plugged into it appropriate receptacle on the controller
(ref pg 5).
Flush Strike Interlock
Refer to the instructions inside the strike box for
mounting requirements.
EMI Interlock
1) Position interlock to door jamb and mark
mounting holes.
2) Fasten Interlock to door jamb with #8 wood
screws.
3) Route 4-conductor Interlock cable thru hole in
top of interlock and make wire connections.
4) Attach door keeper and emergency key plates
to hoistway door.
14
EMI
Interlock
Wiring
Connections
EMI
Lift
Harness
Black
(A)
Black
Black
(B)
Green
Yellow
(C)
White
Yellow
(D)
Orange
N/A
Blue+
N/A
Brown+
N/A
Red
+Must
be
tied
together
when
using
an
EMI
Interlock.
Flush
Strike
Interlock
Wiring
Connections
For
AC
powered
lifts
Flush
Strike
Wires
Rectifier
Wires
Lift
Harness
Wires
Black
‐
White
Stripe
Red
Black
‐
White
Stripe
Black
Yellow
Black
Yellow
Green*
Yellow
White
Blue
Orange
Grey
Blue
Green
Brown
Red
Red
Black
Black
Yellow
Red
Yellow
Green*
For
Optional
DC
powered
lifts
Lift
Harness
Wires
Flush
Strike
Wires
Black
‐
White
Stripe
Black
‐
White
Stripe
Yellow
Blue
Grey
Green
Red
Black
Black
Green*
White
Orange
Blue
Brown
Red
Green*
* This
is
a
single
wire
that
will
have
2
wires
connected
to
it.
