OUTSIDE VEHICLE LIFT:
Owner’s Manual
18MAR2022 | 630-00105 B
9
OPERATION
OUTSIDE VEHICLE LIFT: SECTION 3
SECURING THE MOBILITY
DEVICE
Depending on the lift model and the type of
securement device it uses, the platform may be raised
halfway by pressing the toggle switch UP. By raising the
platform, the straps will be easier to attach or will be
easier to raise the mobility device’s armrest out of the
way of the hold-down arm. See Figure 3-4.
Hold-Down Arm
Straps
Figure 3-4
NOTES FOR AL015, AL100, AL100HD,
AL100-DE, AL160 AND AL300-FULL
MODELS
Ensure that the securement system (whether it’s
a hold-down arm, hold-down foot or straps) has
enough tension to secure the device.
NOTICE
On some scooters, it may be necessary to
temporarily move the steering tiller forward to clear
the hold-down foot as it lowers into the lock-down
position.
Some scooters have pneumatic (air-inflated) tires. If
your scooter has this type of tire, be sure the tires are
properly inflated. Improper inflation will change the
deck height of the scooter and therefore change the
amount of clamping force the hold-down foot places
on the scooter. The scooter can fall off the lift if not
properly secured.
NOTICE
RAISING THE LIFT
1.
When the mobility device is secure, use the
UP toggle switch to continue raising the lift.
2.
Stop raising the lift when it reaches the top
of travel and when you hear the clicking or
ratcheting sound.
3.
Remove the key. See Figure 3-5.
Figure 3-5
