Vista FX
1-30 Vista FX
Document generated: 28.08.14
SW V4.9
Voice 1 Frequency :
The delay voice output signal is filtered by a one pole low-pass. This is the
filters cutoff frequency Range [50 .. 20’000] Hz
Voice 1 FB :
The feedback signal is filtered by a one pole low-pass. This is the filters cutoff
frequency Range [50 .. 20’000] Hz
Mst Diffusion :
Input diffusion is the first part of processing for any signal entering a delay.
It can be described as a smearing or softening of the signal and is typically
used to lessen the impact of strong transients. Range [0 .. 100] %.
FB Diffusion :
Feedback Diffusion is similar to Input Diffusion, except that it is applied to
a delayed signal that is being added back into the input. Range [0 .. 100] %.
LFO Rate :
Sets the speed of an LFO. Range [0.01 .. 10.0] Hz
Delay Feedback :
Controls all delays in the algorithm. Each voice has its nominal feedback gain
adjusted by this percentage. Range [0 .. 100] %.
Tapping :
Assigns the Tap control to one of the
USR
buttons on the consoles channel
strip. Range [No, USR1, USR2]
