Vista FX
1-14 Vista FX
Document generated: 28.08.14
SW V4.9
Dual Stereo
setup : This setup provides two stereo effect blocks for one engine. It is suitable for
usage of a stereo effect, e.g. a stereo reverb. Since two engines are avaialble,
the user has the benefit of running two different stereo effects at the same
time. The stereo effect then can be used as a send-return effect, or also as an
insert effect for a stereo channel.
Quad Mono
setup : This provides four mono effect blocks for one engine. It is the preffered choice
when using insert effects for mono channels. With both engines in this setup,
up to eight insert effects can be provided. Of course, also the combination of
different setups within one hardware unit is possible (see screenshot above).
Single Two In Five Out
setup : This setup can be used to create a five channel surround effect with a simple
stereo signal as the source. A nice way to create 5.1 ambiance for a stereo
track.
Single Five In Five Out
setup : This setup allows to create real surround effects. A 5.0 surround input signal
will create a 5.0 effect signal.
Single Six In Six Out
setup : For this setup only pitch shift effects can be loaded to treat a 5.1 signal in
terms of pitch. For surround reverbs it is recommended to use the
Single
Five In Five Out
setup.
When the setup procedure has been done for all available engines - or for at
least all the engines which are required in the current project - the necessary
input- and output ports are ready to be used in the general patch page. (They
are not greyed out anymore).
Note :
The engine setup is the base setup on which all later selected effects are
loaded. So changing the engine setup after effects have already been worked
