Vista FX
1-20 Vista FX
Document generated: 28.08.14
SW V4.9
5.4 create insert effects
To setup the desk for working with an ‘Insert’ effect, the following steps of
preparation need to be carried out :
1.
Patch the effect output port and effect input port into the insert path of the
desired channel - either on general patch or easier on channel patch page.
On the channel patch page : only the desired FX block needs to be chosen
from the pull-down menu, patching is then done automatically. The pull-down
menu shows all FX blocks which are not used yet, and which fit the channel
width (mono. stereo, surround) of the channel.
The patching, which is carried out automatically, will then show as follows :
