manualshive.com logo in svg

Harman Soundcraft Vi2000, User Manual

The Harman Soundcraft Vi2000 is a cutting-edge audio mixing console designed for professionals. Enhance your sound system with this powerful device. Easily access the User Manual on our website for free download, providing you with clear instructions and guidance. Visit manualshive.com to unlock the full potential of your Vi2000.

Share
Download
background image

Vi2000 USER MANUAL

18.0 

 

18.0: VM ² 

 

18.0: VM ² 

VM² is a patented feature that allows the status information for HiQnet-enabled AKG Wireless Microphone systems 

to be displayed directly within the channel strip that they are connected to. This feature takes advantage of Harman’s 

HiQnet network control protocol and brings many benefits including streamlining of the workflow and increase in speed 

of problem diagnosis.

HiQnet-enabled AKG wireless receivers can be connected to the HiQnet network directly, via the AKG Hub4000Q 

(HiQnet merge device), from a shared network via an Ethernet Switch.

On the Vi2000, the HiQnet network setup is located in the main menu ([MENU]) under the (System) tab.

Available VM² status’ are shown in the input channel’s input block in the touchscreen, and in the VST section when 

that input block is selected. Also, the microphone names appear in the channel label display in the touch screen.

About HiQnet

HiQnet is a network communications protocol developed by Harman which enables various professional audio 

products within the Harman Pro-audio range to communicate with each other and provides remote control and 

monitoring of Harman devices such as power amplifiers, powered speakers, DSP processors and microphones. 

Ethernet is normally used as the transport method for HiQnet control, as it provides a robust and standardised method 

of connecting multiple devices in a network configuration. A Windows application called Audio Architect provides a 

master control and monitoring program that allows all equipment on the HiQnet network to be controlled from a single 

user interface.

On the Vi Series of consoles HiQnet allows error messages generated by other Harman devices to be displayed in 

the console’s message log – for example thermal overload messages generated by Crown amplifiers. In addition the 

consoles are able to transmit a Venue Preset recall - the HiQnet equivalent of a MIDI Program Change – to all other 

devices in the network.

VM² - Wireless System Monitoring

Summary of Contents for Soundcraft Vi2000











































































































































































































Reviews:

No comments

Related manuals for Soundcraft Vi2000

Yamaha RACK Reference Manual preview
RACK
Brand: Yamaha Pages: 103
Hans Grohe Ecostat Comfort HQ Instructions For Use/Assembly Instructions preview
Ecostat Comfort HQ
Brand: Hans Grohe Pages: 72
Sanlida CHEFLEE SM-1519N Instruction Manual preview
CHEFLEE SM-1519N
Brand: Sanlida Pages: 14
inventum mini-blender NB121 Instruction Manual preview
mini-blender NB121
Brand: inventum Pages: 28
Unit UEM-752 User Manual preview
UEM-752
Brand: Unit Pages: 20
Aurora AU 4092 Quick Start Manual preview
AU 4092
Brand: Aurora Pages: 10
Clatronic UM 3047 Instruction Manual & Guarantee preview
UM 3047
Brand: Clatronic Pages: 40
Maestro COMET CHORUS User Manual preview
COMET CHORUS
Brand: Maestro Pages: 38
Tascam TM-D4000 Owner'S Manual preview
TM-D4000
Brand: Tascam Pages: 108
Voodoo Lab TREMOLO II User Manual preview
TREMOLO II
Brand: Voodoo Lab Pages: 2
Grundig HM 7680 User Manual preview
HM 7680
Brand: Grundig Pages: 120
LOOPTROTTER SATUR-8/24 Owner'S Manual preview
SATUR-8/24
Brand: LOOPTROTTER Pages: 9
DAPAudio GIG-124CFX Manual preview
GIG-124CFX
Brand: DAPAudio Pages: 24
DAPAudio D2191 Product Manual preview
D2191
Brand: DAPAudio Pages: 19
Audio2000's AMX7323 Owner'S Manual preview
AMX7323
Brand: Audio2000's Pages: 6
Citronic SM550 Owner'S Manual preview
SM550
Brand: Citronic Pages: 17
Gemini 15 User Manual preview
15
Brand: Gemini Pages: 28
thomann USB Mix 4 User Manual preview
USB Mix 4
Brand: thomann Pages: 20

Brands by name

Popular brands

Load more brands