Harman® • P35i-C Installation Manual_R2 • 2019 -___ • 02/20
21
8390-784i
5
5
Appliance Set-Up
A. Unpacking Unit
Once the box is removed, the unit will need to be remove
from the skid.
Remove the ash pan cover from unit to uncover the spring
latches that hold the unit to the mounting frame, Figure 5.1.
Figure 5.1
- Remove ash pan cover.
Unlatch the spring latch located on both the right and left
hand side to release the unit from the mounting frame,
Figure 5.2.
Figure 5.2
- Unlatch spring latch.
Spring Latch
Figure 5.3
- Pull unit away from the mounting frame.
Once spring latches are unlatched and pulled away from
the frame, firmly grab the stove and pull it toward you and
out away from the frame. Set unit to the side, Figure 5.3.
Note: This may take 2 people to achieve.
Now that the unit is removed you can now remove the
mounting frame from the skid. To do this simply remove (4)
5/16-18 Hex head bolts. Figure 5.4.
Figure 5.4
- Remove (4) 5/16-18 Hex Head Bolts
(4) 5/16-18 Hex Head Bolts
Now that the mounting frame is removed from the skid
you can now install the surround panels.
Note:
Installation
instructions for the surround are located inside the box with
the surround panels.
