Oakwood Woodburning Stove
Dry Seasoned Wood Only!
Harman® • Oakwood Owner's Manual_R34 • 2004 -___ • 09/15
4
3-90-08327
A. Appliance Certification
D. BTU & Efficiency Specifications
1
Listing and Code Approvals
B. Mobile Home Approved
This appliance is NOT approved for Installation in mobile/
manufactured homes.
C. Glass Specifications
This appliance is equipped with 5mm ceramic glass.
Replace glass only with 5mm ceramic glass. Please contact
your dealer for replacement glass if needed.
The Oakwood Woodburning Stove is
Certified to comply with 2015 particulate
emission standards. Not approved for sale
after May 15, 2020.
MODEL:
Oakwood Woodburning Stove
LABORATORY:
OMNI Test Laboratories, Inc
REPORT NO.
135-S-11-2
TYPE:
Solid Fuel Room Heater / Wood
Burning Type
STANDARD(s):
UL 1482-1996, UL 737-1996
,
ULC-S627-00,
EPA Method 28 & 5G
EPA Certification Number:
558
EPA Certified Emissions:
2.3 g/hr
*LHV Tested Efficiency:
63%
**HHV Tested Efficiency:
70.9%
***EPA BTU Output:
10,900 - 30,500
****BTU Input
51,600
Vent Size:
6 Inch
Recommend Log Lenght:
21" Maximum
Fuel
Seasoned Cord Wood
* Weighted average LHV efficiency using data collected
during EPA emissions test.
**Weighted average HHV efficiency using data collected
during EPA emissions test.
***A range of BTU outputs based on EPA Default Efficiency
and the burn rates from the low and high EPA tests.
****Based on the maximum burn rate multiplied by
approximately 8600 BTU’s which is the average BTU’s per
pound of wood with an average moisture content of 20%.
This wood heater needs periodic inspection and repair for
proper operation. It is against federal regulations to operate
this wood heater in a manner inconsistent with operating
instructions in this manual.
