Martin VDO Atomic Bold user guide
19
Interlocking multiple fixtures
Multiple fixtures may be interlocked on any side using the slide-in interlock coupler to form arrays
of any shape. You can also make arrays by combining the smaller VDO Atomic Dot fixture – one
or two Atomic Dot fixtures can be attached to each side of the Atomic Bold fixture (see next
section for details of the double attachment).
To install the Interlock Coupler, locate two fixtures side
by side and slide in the coupler (1) from the rear. The
coupler has two retention clips which lock into each
fixture. Ensure the release key (2) is oriented as shown
so that the clips are secured in place.
Note:
x
A maximum of 4 VDO Atomic Bold fixtures
may be interlocked in a column.
x
When interlocking fixtures horizontally, a
rigging clamp must be used on every fixture
to support the array.
When fixtures are interlocked, the spacing is 300mm.
Summary of Contents for Martin VDO Atomic Bold
Page 1: ...VDO Atomic Bold User Guide...
