Martin VDO Atomic Bold user guide
17
Mounting 2 fixtures on a truss using the double width hanging bracket
Two fixtures can be joined together using the double width bracket to create a 2-lite fixture. The
double width bracket allows adjustment of the fixture angle when clamped to a truss or similar
rigging structure. Use two suitable rigging clamps such as G-clamps or half-couplers fastened to
the hanging bracket.
To create a 2-lite:
1. Attach two VDO Atomic Bold fixtures side-by-side using 2x VDO Atomic Bold Interlock
Doubler (P/N MAR-91616122) and 2x VDO Atomic Coupler (P/N 91610003)..
2. Attach the double-width bracket to the joined fixtures using the supplied knobs.
3. Check that the rigging structure can support at least 6 times the weight of all fixtures and
equipment to be installed on it.
4. Block access under the work area.
5. Bolt two rigging clamps securely to the double width hanging bracket. The bolts used must be
M12, grade 8.8 steel minimum, and fastened with a self-locking nut.
6. Working from a stable platform, mount the fixture-assembly on the truss and fasten the
rigging clamp onto the truss.
7. Attach a safety bond to both fixtures and loop around a fixed point.
Summary of Contents for Martin VDO Atomic Bold
Page 1: ...VDO Atomic Bold User Guide...
