manualshive.com logo in svg

Harman Martin MAC Ultra Wash, Safety And Installation Manual

Share
Download
Harman Martin MAC Ultra Wash Safety And Installation Manual Download Page 20

 20

MAC Ultra Wash Safety and Installation Manual

4. When you see a 

Download Successful

 message you can close Martin Companion. Check that the 

USB drive now contains a folder whose name is the fixture type and software version. Then use an 

Eject

 

command in Windows to make sure that you can remove the drive safely, and remove the drive from the 
PC.

5. Apply power to the fixture and allow it to boot. Insert the USB drive into the USB host socket next to the 

fixture’s control panel. The fixture should illuminate the display and the contents of the root directory 
should appear in the display. If the fixture does not recognize the USB drive automatically, navigate to 

SERVICE

 

→ 

USB

 in the control panel.

6. Scroll to the folder that contains the update files on the USB drive. Select the folder and press ENTER. 

The update will begin automatically and the display will show progress status. At the end of the update 
process the fixture will reboot. Do not remove the USB drive until the reboot is complete.

7. Remove the USB drive from the fixture. The newly-installed firmware version will now be displayed in the 

INFORMATION

 menu.

Summary of Contents for Martin MAC Ultra Wash





























Reviews:

No comments

Brands by name

Popular brands

Load more brands