44
MAC Aura XIP User Manual
Control panel menus
MAC Aura XIP firmware version 1.0.0.
Menu level 1
Menu level 2
Menu level 3
Menu level 4
Notes (Default settings in bold print)
DMX SETUP
DMX ADDRESS
1
– XXX
DMX address (default address =
1
). The
DMX address range is limited so that the
fixture will always have enough DMX
channels within the 512 available.
CONTROL MODE
COMPACT
Compact DMX control mode
BASIC
Basic DMX control mode
EXTENDED
Extended DMX control mode
LUDICROUS
Ludicrous DMX control mode
DMX UNIVERSE
1 - 64000
Set DMX universe
ETHERNET
SETUP
IP ADDRESS
XXX.XXX.XXX.XXX
Display fixture’s static IP address
PART 1 MSB
Set far left block (most significant byte) of
IP address
PART 2
Set middle left block of IP address
PART 3
Set middle right block of IP address
PART 4 LSB
Set far right block (most significant byte) of
IP address
SUBNET MASK
XXX.XXX.XXX.XXX
Display fixture’s subnet mask
EDIT SUBNET
MASK
XXX.XXX.XXX.XXX
Display fixture’s subnet mask
XXX.XXX.XXX.XXX
Set subnet mask with 1 bit increments
from the left
MAC ADDRESS
XX:XX:XX:XX:XX:XX
Display fixture’s MAC address
RESET IP SETUP
RESET
ARE YOU SURE?
YES/NO
Reset static IP address and subnet mask
to default values
FIXTURE ID
0 – 9999
User-settable 4-digit fixture ID number
(default =
0
)
PERSONALITY
PAN/TILT
PAN INVERT
ON/
OFF
Inverse DMX pan control: right
→
left
TILT INVERT
ON/
OFF
Inverse DMX tilt control: down
→
up
LIMIT PAN/TILT
PAN MIN
→
-32767
Set minimum pan angle limit
PAN MAX
→
32768
Set maximum pan angle limit
TILT MIN
→
-32767
Set minimum tilt angle limit
TILT MAX
→
32768
Set maximum tilt angle limit
RESET PAN/TILT
LIMITS
Confirm with: ARE YOU SURE? YES/NO
Returns fixture to default pan/tilt limits. The
default limits match GT Truss with
half-coupler rigging clamps.
SPEED
PAN/TILT
FAST
Optimize pan/tilt movement for speed
SMOOTH
Optimize pan/tilt movement for
smoothness
EFFECT
FAST
Optimize effects movement for speed
SMOOTH
Optimize effects movement for
smoothness
FOLLOW P/T
Effects speed follows the speed setting
applied to pan and tilt via DMX or in
control menu
Table 4: Control menus
