Harman Martin ELP PAR, User Manual, Page: 25 / 52

Martin ® ELP PAR User Guide 25
DMX Live
You can view the DMX values currently being received on each of the
fixture’s DMX channels . This can be useful for troubleshooting purposes.
To view the DMX values being received:
1. Select DMX LIVE and use the UP and DOWN buttons to scroll through
the value being received on each channel.
2. To return to the previous level of the menu structure, press MENU.
Resetting the fixture
You can reset the entire fixture to return it to its state when you powered it
on, or you can reset its effects only.
•
To carry out a full reset, select MANUAL CONTROL → RESET → ALL,
select YES or NO and press ENTER. The entire fixture will reset as if
you had cycled power. The reset process will take several seconds.
•
To reset only the fixture’s effects, select MANUAL CONTROL → RESET
→ EFFECTS and press ENTER. The fixture’s effects will reset. The
effects reset process will take several seconds.
Manual control
You can control the fixture’s effects manually without needing a DMX signal.
This lets you set up a stand-alone scene.
To manually control the fixture:
1. Select MANUAL CONTROL and then use the UP and DOWN buttons to
scroll to the effect that you want to control. Press ENTER.
2. Use the UP and DOWN buttons to scroll to the DMX value from 000 to
255 that you want to send to that effect. Press ENTER to confirm and
send that value.
3. To return to the list of effects, press MENU.
4. If you want to manually control other effects together with the first effect,
repeat steps 1. and 2. and 3. above for the other effects. When you have
finished setting effects, return to the previous level of the menu structure,
by pressing MENU.
The fixture will continue to show the effects that you have set manually
until you set new manual control values for the effects. The effects are
unaffected by a power OFF/ON cycle: if you power the fixture off and on
again, it will resume showing the effects.
To stop the effects, open the DMX SETUP menu. This will immediately
stop all manually controlled effects.