Harman Martin ELP PAR, User Manual, Page: 20 / 52

20 Martin ® ELP PAR User Guide
Tungsten emulation mode
In tungsten emulation mode, the fixture’s white light output is made warmer,
the warm shift is increased at lower dimming levels, and an ‘afterglow‘ effect
is add ed after dimming. This mode gives the ‘look and feel’ of a fixture that
uses a 2800 K incandescent light bulb as its source.
Dimming curves
Four dimming curves are available:
LINEAR – The increase in light intensity appears to be linear as DMX
value is increased.
SQUARE LAW
– light intensity control is finer at low levels and coarser
at high levels.
INVERSE SQUARE LAW
– light intensity control is coarser at low levels
and finer at high levels.
S-CURVE
– light intensity control is finer at low levels and high levels
and coarser at medium levels.
To set the fixture’s dimm ing curve:
1. Select DIMMER CURVE and press ENTER. The currently set dimming
curve mode will blink in the display.
2. Use the DOWN and UP buttons to select LINEAR, SQUARE LAW, INV
SQ LAW, or S-CURVE.
3. Press ENTER to confirm your choice (or press MENU to exit without
making a change).
Dimming speed and smoothness
You can optimize dimming to give either the fastest or the smoothest
changes in dimming levels. To optimize dimming:
1. Select DIMMING SPEED and press ENTER.
2. Use the DOWN and UP buttons to select FAST (dimmer optimized for
speed) or SMOOTH (dimmer optimized for smoothness).
3. Press ENTER to confirm your choice (or press MENU to exit without
making a change).