background image

5

N

519 AUDIO PLAYER

 

/

 

OWNER’S MANUAL

ENGLISH

GETTING STARTED

FRONT-PANEL OVERVIEW

GETTING STARTED

Front-panel

 

controls/indicators

Input knob: Rotate this knob to select the desired input to send 
to the outputs. (Note: the Input knob will bypass any input for 
which the Input has been disabled in the 

Settings > Input Setup 

menu.)

IR receiver: the IR receiver receives commands from the 
included remote control when the unit is not being controlled 
via its rear-panel IR Input connector (see Rear-Panel Overview 
for more information). Infrared communication requires line-
of-sight between the remote and this “target” on the unit’s front 
panel.

Bluetooth receiver: the Bluetooth receiver receives the 
Bluetooth stream from the connected device (phone, tablet, or 
computer). Bluetooth communication does not require line-of-
sight between the device and this receiver on the unit’s front 
panel, but for best range of distance between the two, line-of-
sight is encouraged.

Headphone output connector: this ¼-inch (6.3mm) TRS phone 
plug connector provides a line-level stereo signal that can drive 
headphones up to 32 ohms in Class A. When the unit detects 
that headphones have been connected, the Balanced and 
Single-Ended outputs are automatically muted, and the Volume 
knob switches to control of the Headphone output level. When 
the unit detects the headphones have been disconnected, the 
Balanced and Single-Ended outputs are automatically unmuted, 
and the Volume knob returns to control of their level.

play/pause

select

settings

back

stop/eject

mute

volume

input

next

previous

standby

AUDIO PLAYER N

o

 519 

headphones

Settings 

button

Mute 

button

Back 

button

Input

knob

Headphone 

output 

connector

Disc Slot

Select 

button

Stop/eject 

button

Next 

button

Standby 

button

Standby 

LED

Previous 

button

Play/pause 

button

Bluetooth 

receiver

IR receiver

Volume/value 

knob

Summary of Contents for Mark Levinson 519

























Reviews: