background image

4

N

519 AUDIO PLAYER 

/

 

OWNER’S MANUAL

INSTALLATION  CONSIDERATIONS

OPERATING STATES 

The player has three operating states:  

• 

Off:

 The AC mains power is disconnected by using the rear-

panel Power switch or by removing the power cord from 
the rear panel.

• 

Standby:

 The Standby mode has three settings that can 

be selected via the menu system: Green, Power Save, and 
Normal. 

Green:

 This mode removes power from almost all of 

the circuits, allowing the unit to be activated only via 
an IR control signal, a 5V – 12V trigger or a press of 
the Standby button. 

This mode provides maximum 

power conservation and is the factory-default 
Standby mode.

 

Power Save:

 This mode removes power from the 

audio circuits, but keeps the control and streaming 
circuitry powered and ready to receive commands. 
This mode provides moderate power conservation. 

Normal:

 This mode shuts off the display and mutes its 

audio outputs, but keeps all of its control, streaming, 
and audio circuits powered. This mode provides the 
least amount of power conservation but allows the 
audio circuits to remain warmed up to deliver optimal 
performance at all times.

• 

On: 

The entire unit is powered up and all configured outputs 

are active.

The player has an Auto Off feature that automatically places it 
into the Standby mode after 20 minutes of no user control input 
or audio signal passing through the unit. The factory-default 
setting for the Auto Off feature is on (engaged). You can disable 
the Auto Off feature in the menu.

UPDATES 

Having the most up to date software on your № 519 is important 
for the best reliability and function.

Once connected to the internet (See 

Quick Setup and Listen 

> Wi-Fi Setup for steps on how to connect), your unit will 
automatically search for new updates. If new updates are found, 
the № 519 will notify you via a gear icon present at the top of the 
screen. To install these updates, navigate to 

Settings > System 

>

 Update Firmware > Check for update online. 

Summary of Contents for Mark Levinson 519

























Reviews: