7
REAR PANEL CONNECTIONS
VIDEO / AUDIO INPUT (PLAY) JACKS OF VCR1
Connect these jacks to the corresponding OUTPUT jacks of your
TV (if available) or VCR.
VIDEO / AUDIO OUTPUT (REC) JACKS OF VCR1
Connect these jacks to the corresponding INPUT jacks of a VCR.
VIDEO OUTPUT jack: Connect this jack to the VIDEO INPUT jack
of the VCR. VIDEO REC jack: Connect these jacks to the AUDIO
INPUT jacks of the VCR.
VIDEO MONITOR JACK
Connect this jack to the VIDEO INPUT jack of a TV/MONITOR.
REMOTE CONTROL OUT JACK
Connect this jack to the REMOTE IN jack on a JBL or Harman
Kardon component. Use one of the accessory mini-plug cables.
You can control many other JBL or Harman Kardon components in
your system using the JSR 625 remote commander.
MULTI-ROOM REMOTE IN JACK
Connect a Harman Kardon HE 1000 remote IR sensor to this jack.
You can operate the unit by remote commander through the
adaptor. It is convenient when the unit is located in a separate
room.
FRONT PRE OUT AND MAIN IN JACKS
Front Pre Out
When a separate power amplifier is used to drive the front speak-
ers, connect the power amplifier input to these jacks.
Front Main In
When a separate pre-amplifier is connected and this unit is used
as a power amplifier, connect the pre-amplifier output to these
jacks.
NOTE: When you do not use the PRE OUT and MAIN IN sepa-
rately, always connect the PRE OUT and MAIN IN jacks with a
jumper plug.
SUBWOOFER OUTPUT JACKS
Connect a powered subwoofer to these jacks. This output may also
be used for any external component requiring a full bandwidth line-
level input.
SPEAKER TERMINALS
Connect the front left (L) and right (R) speakers to the correspond-
ing terminals. Make sure that the positive (+) and negative (–) ter-
minals on the speaker are connected to the corresponding termi-
nals on the receiver.
CENTER/REAR SPEAKER TERMINALS
Connect center and rear speakers to the corresponding terminals.
When you connect the rear speakers, connect both L and R
speakers.
PLEASE NOTE: Sound will not be provided through the rear
speakers unless both speakers are connected.
AC INPUT CORD
Plug this cord in AC outlet on a wall.
AC SWITCHED OUTLET
These outlets provide AC power. The AC power is switched by the
power button. Use this outlet for a CD player or a cassette deck.
AC UNSWITCHED OUTLET
This outlet provides AC power. The AC power is not switched by
the POWER button.
NOTE: Do not plug irons or toasters or other products with high
power consumption into these outlets.
19
18
17
16
15
14
13
12
11
10
9
8
JSR625 Owners Manual 7/28/98 10:54 AM Page 7
