The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated "dangerous voltage" within
the product's enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accom-
panying the appliance.
JBL JSR 625
Date of purchase ________________________
Purchased from _________________________
Address of business purchased from _________
______________________________________
Installed by _____________________________
Date Installed ___________________________
Serial No. ______________________________
NOTE TO CATV SYSTEM INSTALLER:
This reminder is provided to call the CATV
system installer’s attention to Article 820-
40 of the NEC that provides guidelines for
proper grounding and, in particular, speci-
fies that the cable ground shall be con-
nected to the grounding system of the
building, as close to the point of cable
entry as practical.
Thank you for choosing a JBL Audio/Video Receiver.
Your new Unit is an exceptionally well-engineered product that will
give you years of superb performance.
Save all packing material.
It is essential for shipping should you move, or in the event the
unit ever needs repair.
U.S. and Canadian customers should use 120 volt AC only. Other
customers should use voltages appropriate to their area.
Connecting the unit to an outlet supplying a higher voltage may
create a fire hazard.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
ATTENTION:
POUR EVITER LES CHOCS ELEC-
TRIQUES, INRODUIRE LA LAME LA PLUS LARGE DE
LA FICHE DANS LA BORNE CORRESPONDANTE DE
LA PRISE ET POUSSER JUSQU’AU FOND.
HANDLE THE POWER CORD GENTLY
■
To disconnect the plug from the AC outlet, pull on the plug
itself, not on the cord.
■
Disconnect the plug from the AC outlet whenever the unit is to
be left unused for an extended period of time.
■
Do not place furniture or other heavy objects on the cord, and
avoid dropping heavy objects on it. Also do not make a knot in
the cord.
PLACE THE UNIT ON A FIRM AND LEVEL SURFACE
Avoid installing it:
■
In moist or humid places
■
Close to heating equipment or in places exposed to direct
sunlight
■
In a direct draft from an air conditioner or in other very cold
locations
■
In places subject to excessive vibration or dust
■
In poorly ventilated places
MOVING THE UNIT
Before moving the unit, be sure to unplug the power cord from
the AC outlet and disconnect all wires to antennas and other
components.
DO NOT OPEN THE CABINET
Do not attempt to service this unit. Tampering with internal compo-
nents can cause fire or shock, and may void your guarantee. If
water or a small object enters the unit, unplug the power cord
immediately and consult an authorized JBL service center. Using
the unit under such conditions may cause a fire or shock hazard.
CLEANING
Remove dust by wiping the unit with a soft, dry cloth. If necessary,
use a soft cloth lightly dampened with mild soapy water; then wipe
with a dry cloth. Never use benzene, thinner, alcohol or other
volatile agents, and avoid spraying insecticides near the unit.
FCC INFORMATION
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio TV technician for
help.
CAUTION: Any changes or modifications in construction of this
device which are not expressly approved by the party responsible
for compliance could void the user’s authority to operate the
equipment.
2
JSR625 Owners Manual 7/28/98 10:53 AM Page 2
