page 26
DriveCore Install DA Series Operation Manual
Speaker Tunings
Speaker Tuning Libraries
The speaker tuning library system uses software-based speaker tuning libraries. Audio Architect manages these libraries within the device DLL. A library can contain any
number of tunings. Audio Architect can manage any number of libraries. The library system implemented includes the following:
•
Working Library
– The working library is opened and active when opening any Speaker Tuning panel. The working library is automatically updated with the latest
stored tunings/settings when exiting the open Speaker Tuning panel. Audio Architect is installed preconfigured for DCi amplifiers with a working library previously
loaded with JBL Screen Array tunings from the JBL Master Screen Array Library.
NOTE:
Multiple Speaker Tuning panel's can be opened but only the last parameters on the last panel closed are saved to the working library.
•
JBL Master Screen Array Library
– This library is included with Audio Architect at install. The tunings in this library were developed and validated against
previous same tunings for Crown DSI amplifiers. These tunings are read-only to prevent overwrite. At any time, you can load this library to access reference tunings for
JBL Screen Array loudspeakers.
•
User Libraries
– At any time, you may save the current working library to a custom user library file.
Loading a Library
From the Configuration panel, click on
File > Open > Speaker Tuning
to load an existing library file into the working library. This action replaces the current working
library. Any changes not saved to the existing working library will be lost.
Figure 34:
Loading a speaker tuning library
Saving a Library
From the Configuration panel, click on
File > Save > Speaker Tuning
to save the current working library as a library file.
Figure 35:
Saving a speaker tuning library
NOTE:
JBL files are write-protected/read-only and cannot be overwritten.
