1
Regulatory Information
An example of this equipment has been tested and found to comply with the following European and international
standards for electromagnetic compatibility and electrical safety:
Radiated Emissions (EU):
EN55022:2010
Immunity (EU):
EN55024:2010
Electrical Safety (EU):
IEC60065-01 + AMD 2
Electrical Safety (USA):
UL60065-03
Product Registration/Warranty
To register your product, please visit http://bssaudio�com/en-US/support/warranty_registration�
For warranty information, please visit http://bssaudio�com/en-US/support/warranty_policy�
Important User Information
Do not remove covers. No user serviceable parts inside, refer servicing to qualified service personnel. For continued
compliance with international EMC regulations, it is important that all cables be screened, and connected as
follows: Audio cable screens to their BLU-Device connector ground� Control cable screens to the ground screws
adjacent to the connector. Network cables should be of type Cat 5 or better, fitted with a clip-on ferrite sleeve
(STEWART TYPE 28A2029-0A0) near the network socket end� This equipment must be earthed� It should not be
necessary to remove any protective earth or signal cable shield connections to prevent ground loops� Any such
disconnections are outside the recommended practice of BSS Audio, and will render the EMC or safety certificate
void�
Mechanical Installation
If the unit is likely to undergo extreme vibration through extensive road trucking and touring, the unit must be
supported at the rear and/or sides to lessen the stress on the front mounting flange. Damage caused by insufficient
support is not covered by the warranty. To prevent cosmetic damage to the front panel finish, use protective plastic
cups under the rack mounting bolts�
Summary of Contents for BSS Soundweb London BLU-103
Page 1: ...Soundweb TM London BLU 103 Installation Guide 5054331 A ...
Page 15: ......
