Harman BSS Audio Soundweb London BLU-120 Installation Manual Download Page 11

Page: 11 / 12

THD:

<0.01% [20Hz to 20kHz, +10dBu output]

Dynamic Range:

108dB typ. [22Hz to 22kHz unweighted]

Crosstalk:

<-75dB

D/A Latency:

28/Fs [0.58ms@48k, 0.29ms@96k]

DIGITAL OUTPUTS

Up to 16 AES/EBU or S/PDIF on Phoenix/Combicon removable screw connectors

Output Impedance:

110 ohm [AES/EBU], 75 ohm [S/PDIF]

Sample Rate:

48kHz or 96kHz

Sample Rate conversion:

8kHz-96kHz

THD+N:

<-140dB

Latency SRC OFF:

6/Fs [0.13ms@48k, 0.06ms@96k]

Latency SRC ON:

60/Fs [1.25ms@48k, 0.63ms@96k]

CONTROL PORTS

12 inputs and 6 outputs

Control Input Voltage:

0 to 4.5v

Control Input Impedance:

4.7kOhms to +5V [2-wire mode] >1MOhm [3-wire mode]

Logic Output Voltage:

0 or +5V unloaded

Logic Output Impedance:

440 Ohm

Logic Output Current:

10mA source, 60mA sink

WATCHDOG OUTPUT

Phoenix/Combicon connector for failsafe control

Opto Output current:

14mA maximum

Withstanding voltage:

80V maximum [Off]

Series Impedance:

220 Ohms [isolated]

CONTROL NETWORK [All Models]
Connectors:

RJ45 Ethernet connector

Maximum cable length:

100m/328ft on Category 5 cable between device and Ethernet switch

BLU-link

AUDIO NETWORK [BLU-800, 320, 160, 120]

Connectors:

2 x RJ45 Ethernet connectors

Maximum cable length:

100m/328ft on Category 5e cable between devices

Latency:

11/Fs [0.23ms@48k, 0.11ms@96k]

Pass Through Latency:

4/Fs [0.08ms@48k, 0.04ms@96k]

CobraNet

AUDIO NETWORK [BLU-80, 32, 800, 320]

Connectors:

2 x RJ45 connectors

Maximum cable length:

100m/328ft on Category 5 cable between device and Ethernet switch

Latency:

1.33ms-5.33ms

Dante

AUDIO NETWORK [BLU-806, 326]

Connectors:

2 x RJ45 connectors

Maximum cable length:

100m/328ft on Category 5 (100Mbps) or Category 5e/Category 6 (Gigabit) cable

between

devices

Latency:

0.15ms-5.0ms

AVB AUDIO NETWORK [BLU-805, 325]
Connectors:

2 x RJ45 connectors

Maximum cable length:

100m/328ft on Category 5e cable between device and AVB compliant Ethernet switch

Sample Rate:

48kHz

Latency:

0.5ms-2.0ms

Compatible AVB Switches:

BSS Audio/NETGEAR GS724T Ethernet Switch

LABX Titanium 411 Ruggedized AVB Ethernet Bridge Switch

POWER/TEMPERATURE
Mains Voltage:

100-240V AC, 50/60Hz

Power Consumption:

<35VA [BLU-80, 32, 16]; <55VA [BLU-800, 805, 806, 320, 325, 326, 160, 120]

BTU Rating:

<120 BTU/hr [BLU-80, 32, 16]; <188 BTU/hr [BLU-800, 805, 806, 320, 325, 326, 160,

120]

Operating Temperature Range:

5[41] to 35[95] degrees C[degrees F]

Summary of Contents for BSS Audio Soundweb London BLU-120













Search results

Summary of Contents for BSS Audio Soundweb London BLU-120

Reviews:

Related manuals for BSS Audio Soundweb London BLU-120

Brands by name

Popular brands

Harman BSS Audio Soundweb London BLU-120, Installation Manual

Search results

Summary of Contents for BSS Audio Soundweb London BLU-120

Reviews:

Related manuals for BSS Audio Soundweb London BLU-120

Brands by name

Popular brands