background image

2

WARNING FOR YOUR PROTECTION

READ THE FOLLOWING:

KEEP THESE INSTRUCTIONS

HEED ALL WARNINGS

FOLLOW ALL INSTRUCTIONS

THE APPARATUS SHALL NOT bE ExPOSED TO DRIPPING OR SPLASHING 

LIqUID AND NO ObjECT FILLED WITH LIqUID, SUCH AS vASES, SHALL 

bE PLACED ON THE APPARATUS

CLEAN ONLY WITH A DRY CLOTH.

FOR INDOOR USE ONLY.

DO NOT bLOCK ANY OF THE vENTILATION OPENINGS. INSTALL IN AC-

CORDANCE WITH THE MANUFACTURER’S INSTRUCTIONS.

DO NOT INSTALL NEAR ANY HEAT SOURCES SUCH AS RADIATORS, HEAT 

REGISTERS, STOvES, OR OTHER APPARATUS (INCLUDING AMPLIFIERS) 

THAT PRODUCE HEAT.

ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED bY THE MANU-

FACTURER.

UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN 

UNUSED FOR LONG PERIODS OF TIME.

Do not defeat the safety purpose of the polarized or grounding-type plug. A 

polarized plug has two blades with one wider than the other. A grounding 

type plug has two blades and a third grounding prong. The wide blade or 

third prong are provided for your safety. If the provided plug does not fit 

your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, 

convenience receptacles, and the point where they exit from the apparatus.

Use only with the cart stand, tripod bracket, or table specified by the manu-

facture, or sold with the apparatus. When a cart is used, use caution when 

moving the cart/apparatus combination to avoid injury from tip-over.  

Refer all servicing to qualified service personnel. Servicing is required when 

the apparatus has been damaged in any way, such as power-supply cord 

or plug is damaged, liquid has been spilled or objects have fallen into the 

apparatus, the apparatus has been exposed to rain or moisture, does not 

operate normally, or has been dropped.

POWER ON/OFF SWITCH: 

For products provided with a power switch, the 

power switch DOES NOT break the connection from the mains.

MAINS DISCONNECT: 

The plug shall remain readily operable. For rack-mount 

or installation where plug is not accessible, an all-pole mains switch with a 

contact separation of at least 3 mm in each pole shall be incorporated into 

the electrical installation of the rack or building.

FOR UNITS EqUIPPED WITH ExTERNALLY ACCESSIbLE FUSE RECEPTACLE: 

Replace fuse with same type and rating only.

MULTIPLE-INPUT vOLTAGE: 

This equipment may require the use of a 

different line cord, attachment plug, or both, depending on the available 

power source at installation. Connect this equipment only to the power 

source indicated on the equipment rear panel. To reduce the risk of fire or 

electric shock, refer servicing to qualified service personnel or equivalent.

If connected to 240V supply, a suitable CSA/UL certified power cord shall 

be used for this supply.

This Equipment is intended for rack mount use only.

SAFETY INSTRUCTIONS 

NOTICE FOR CUSTOmERS IF YOUR UNIT IS EqUIPPED WITh A POWER CORD.

WARNING: ThIS APPLIANCE ShALL BE CONNECTED TO A mAINS SOCKET OUTLET 

WITh A PROTECTIVE EARThING CONNECTION.

The cores in the mains lead are coloured in accordance with the following code:

GREEN and YELLOW - Earth        bLUE - Neutral        bROWN - Live

As colours of the cores in the mains lead of this appliance may not correspond with 

the coloured markings identifying the terminals in your plug, proceed as follows:

•  The core which is coloured green and yellow must be connected to the terminal 

in the plug marked with the letter E, or with the earth symbol, or coloured green, 

or green and yellow.

•  The core which is coloured blue must be connected to the terminal marked N 

or coloured black.

•  The core which is coloured brown must be connected to the terminal marked L 

or coloured red.

 

This equipment may require the use of a different line cord, attachment plug, or both, 

depending on the available power source at installation. If the attachment plug needs 

to be changed, refer servicing to qualified service personnel who should refer to the 

table below. The green/yellow wire shall be connected directly to the units chassis.

CONDUCTOR

WIRE COLOR

Normal

Alt

L

LIVE

BROWN

BLACK

N

NEUTRAL

BLUE

WHITE

E

EARTH GND

GREEN/

YEL

GREEN

WARNING: 

If the ground is defeated, certain fault conditions in the unit or in the 

system to which it is connected can result in full line voltage between chassis and 

earth ground. Severe injury or death can then result if the chassis and earth ground 

are touched simultaneously.

WARNING: 

• Apparatet må tilkoples jordet stikkontakt.

• Apparaten skall anslutas till jordat uttag.

• Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.

The symbols shown above are internationally accepted symbols that warn of 

potential hazards with electrical products. The lightning flash with arrowpoint 

in an equilateral triangle means that there are dangerous voltages present 

within the unit. The exclamation point in an equilateral triangle indicates 

that it is necessary for the user to refer to the owner’s manual.

These symbols warn that there are no user serviceable parts inside the unit. 

Do not open the unit. Do not attempt to service the unit yourself. Refer 

all servicing to qualified personnel. Opening the chassis for any reason 

will void the manufacturer’s warranty. Do not get the unit wet. If liquid is 

spilled on the unit, shut it off immediately and take it to a dealer for service. 
Disconnect the unit during storms to prevent damage.

The following is indicative of low altitude 

use; do not use this product above 

2000m.

IMPORTANT SAFETY INSTRUCTIONS

Summary of Contents for BSS Audio Soundweb London BLU-120













Reviews: