Decoder Configuration Options
N2412A/N2422A User Manual
49
TABLE 19
Settings Page: Decoder Setup Section (Cont.)
Option
Description
Notes
Video Mute
Enable to mute video by outputting solid black.
Audio Mute
Enable to mute output audio
Lineout Volume
This slider controls the output gain on the analog audio
output. By default, it controls both the left and right
lineout channels. Click the
Set Left/Right
link to control
channels individually.
Enable HDMI Audio
Set HDMI audio to be disabled, enabled, or selected
automatically based on the source.
ON
forces audio on at all times.
AUTO
reads the EDID
of the connected device to determine whether or not
to send audio.
Cancel
Click to return all controls to the last saved
configuration.
This button affects all
Decoder Setup
controls that
are listed above it.
Save
Click to accept changes made to the controls.
This button affects all
Decoder Setup
controls that
are listed above it.
Advanced Settings
Refer to
Advanced Settings
on page 48 for details on
the options available from this link.
RS232 Settings
Refer to
RS232 Settings
on page 50 for details on the
options available from this link.
Effects Settings
Refer to
Effects Settings
on page 50 for details on the
options available from this link.
Allow SVSI Multicast
Disable this option to prevent the port from outputting
multicast video traffic.
Particularly useful if you are connecting a non-SVSI
device (i.e., not an N-Series device) to a port for
network-based control.
Disable P1
Completely disables the P1 port for all traffic.
Once disabled, anything connected to the P1 port will
no longer be available on the network.
Cancel
Click to return the related controls to the last saved
configuration.
This button affects the
Allow SVSI Multicast
and
Disable P1
controls.
Save
Click to accept changes made to the related controls. This button affects the
Allow SVSI Multicast
and
Disable P1
controls.