Encoder Configuration Options
N2412A/N2422A User Manual
38
Serial Page
Click the
Serial
link at the top of any of the main web pages to access the page shown in
Figure 34
. This page allows you to upload
and execute commands used for direct control of serial devices. Commands may be saved for future use and executed later. The
Serial Code
menu lists all saved commands. See
Table 13
for option descriptions.
NOTE:
If the Port 5004/Serial Port is currently in use by Native Nelinx or another device, sending commands from the Serial page
will be disabled and fail to send the commands.
FIG. 34
Serial Page
TABLE 13
Serial Page Options
Option
Description
Serial Code
Create/select serial commands. Different vendors have different codes that can usually be found through a web
search. Copy/paste new commands (in either ASCII or HEX) directly into the appropriate input space.
To create a new code, select
[New]
from this drop-down, replace the content in the white box, enter a name,
and click the
Save
button.
Save
Save the current code.
Delete
Delete the current code.
Execute
Apply the selected code to the Encoder’s serial connection.
ASCII and HEX
Paste serial commands directly into either the
ASCII
or
HEX
field.
Response
View responses provided by the device receiving the serial command(s).