Installing Wall-Mount (MSD) Panels
27
Modero S Series G4 Touch Panels - Installation & Hardware Reference Manual
Installation Recommendations
During any installation, a lack of ventilation may produce conditions that may adversely affect the device’s operation. In these
circumstances, special care must be made to make sure that temperatures within enclosed areas do not exceed the device’s
maximum rated temperature.
NOTE:
While the outside temperature of the device may be at or below its maximum operating temperature, special care must be
taken before and during installation to ensure that the maximum operating temperature is not exceeded within wall or rack
installation spaces.
Mounting Options
Use the included clear plastic Backbox to attach the panel to most standard wall materials.
NOTE:
Other optional AMX mounting solutions include the MSA-MMK-07/10 Multi Mount Kits, and the MSA-AMK-07/10 Any Mount
Kits, and CB-MXSA-07/10 Rough-In Boxes. Refer to the Quick Start Guide included with each mounting kit for instructions.
Plastic Backbox
S Series wall mount panels comes with a clear plastic Backbox. This Backbox can be used to mount the touch panel into most
standard wall materials. The Backbox can also used to mount the panel into other mounting options.
FIG. 21 shows the Backbox for the MSD-1001-L/2:
FIG. 22 shows the Backbox for the MSD-701-L/2:
FIG. 21
10.1" MODERO S Backbox (Front View)
FIG. 22
7" MODERO S Backbox (Front View)
Locking Tab (X4)
Locking Tab screw (x4)
Mounting holes (X4) for installing the Backbox into a Rough-In Box (screws not included)
Mounting holes (X4) for use with
Use these mounting holes to install
Locking Tab (X4)
Locking Tab screw (x4)
mounting screws (not included)
the Backbox into thin walls (less
than 0.5” thick) or solid surfaces
Locking Tab (X2)
Locking Tab screw (x2)
Mounting holes (X4) for use with
Use these mounting holes to install
mounting screws (not included)
the Backbox into thin walls (less
than 0.5” thick) or solid surfaces
Mounting holes (X2) for installing the Backbox
into a Rough-In Box (screws not included)