If your installation has followed the procedures
in this manual, you should enjoy many years of
trouble-free operation and high-quality listening
enjoyment. The PA 2000 does not contain any
user-serviceable parts. If you suspect a problem
that may require service assistance, contact
your dealer, installer or an authorized Harman
Kardon service depot.
You may also contact Harman Kardon at
www.harmankardon.com.
It is important that any repairs be carried out
only by an authorized Harman Kardon service
agent to ensure proper service and preserve the
protection of your Limited Warranty. It’s a good
idea to keep your sales slip or receipt in a safe
place (along with this manual) so that it will be
available to verify the purchase date for war-
ranty claims.
Input/Output Protection Mode
Under some conditions, such as a shorted
speaker wire, DC voltage on an input connec-
tion or thermal overload, the Harman Kardon
PA 2000 will place itself in a Protect mode to
prevent damage to the amplifier. When this
happens, the
Protect Indicator
4
will light.
When this occurs, IMMEDIATELY turn off the
unit using the power switch and correct the
problem. Then turn the unit back on. If the unit
continues to go into a Protect mode, contact
your dealer or installer for assistance.
Service Information
Troubleshooting Guide
SYMPTOM
CAUSE
SOLUTION
Amplifier will not turn on.
• Power switch turned off
• Turn on power switch.
(no power light LED).
• Remote trigger cable not properly
• Verify connection of trigger cable at both ends.
connected.
Amplifier turns on, but there’s no audio
• Inputs not connected to proper jack.
• Check input connections.
from one or more channels.
• Speakers not connected properly.
• Check speaker connections.
• Improper settings or levels from
• Check the settings on your preamp, processor or controller.
processor or controller.
Audio plays, then cuts off.
• Amplifier shorted
• Check speaker connections for short circuit.
(Protect Indicator lights).
The items listed below are a brief guide to minor problems that may arise with audio equipment such as the PA 2000. Before taking a unit in for service,
you should check to see whether any of these hints solve the problem. If these solutions do not rectify the problem or if the problem recurs, contact your
dealer or an authorized Harman Kardon service depot for assistance.
PA2000
harman/kardon
10
Summary of Contents for PA 2000
