10
Connecting to a receiver/amplifier with Dolby
Digital (AC-3) or DTS (Digital Theater Systems)
decoder
When DVD´s encoded in Dolby Digital or DTS are played, the Dolby
Digital or DTS bitstream is output from the player’s OPTICAL or COAXIAL
digital audio output. When the player is connected to a Dolby Digital or
DTS decoder, you can enjoy theater-quality audio in your home. An opti-
cal digital audio cable or coaxial audio cable (both optional) is required
for these connections, as shown below.
•
Note:
With multiple video sources, your Audio/Video device can be
used for selecting the video signal and routing it to the TV. Connect the
video or S-video output of the DVD10 (whatever is provided with your
device) to the video or S-video input on your device and the video/S-
video output of this device to your TV. For more details, see the manual
of your Audio/Video amplifier/receiver.
Setup and Connections
TV
Dolby Digital or DTS decoder
To S-Video input
To audio input (red/white)
To power outlet (AC 230V/50 Hz)
To video input
(yellow)
To coaxial audio input
To optical audio input
Front Speaker (Left/Right)
Center Speaker
Subwoofer
Surround Speakers
(Left/Right)
