Installation location
5
BDS 280/580
Moving the System
Before moving the system, first disconnect it from Ac power and then remove any
interconnection cables to other components.
Cleaning
When the system gets dirty, wipe it with a clean, soft, dry cloth. If necessary, and only
after unplugging the Ac power cord, wipe it with a soft cloth dampened with mild soapy
water, then a fresh cloth with clean water. Wipe it dry immediately with a dry cloth.
IMPORTANT: NEVER use benzene, aerosol cleaners, thinner, alcohol or any
other volatile cleaning agent.
NOTE: Do not use abrasive cleaners as they may damage the finish of metal
parts. Avoid spraying insecticide near the unit.
BDS Front Panel Controls and Connections
1. Disc slot
2. headphone output and ezSet/eQ microphone input
3. uSB/ipad/ipod/iphone input
4. volume ring and power button
5. nFc for Bluetooth pairing
6. eject
7. Information display
1. Disc slot
: Insert a compatible disc into the slot. The BDS system’s disc slot accepts
5-inch (12 cm) and 3-inch (8 cm) discs.
2. Headphone output and EzSet/EQ microphone input
: Insert the 1/8-inch
(3.5 mm) stereo mini connector from a set of headphones into this jack. When
performing ezSet/eQ speaker calibration, insert the microphone here.
NOTE: When a plug is inserted into the headphone jack, the BDS system’s
speaker output becomes automatically mute; the HDMI audio output
remains active.
3. USB/iPad/iPod/iPhone input
: you can use the uSB port to play audio files from
an Apple iOS device connected to the port, and to play audio files and show video and
picture files from a uSB device inserted into the port. Insert the connector or device
into the uSB port oriented so it fits all the way into the port. you may insert or remove
the connector or device at any time - there is no installation or ejection procedure. you
can also use the uSB port to perform firmware upgrades. If an upgrade for the BDS
operating system is released in the future, you will be able to download it to the BDS
system using this port. complete instructions will be provided at that time.
IMPORTANT: Do not connect a PC or other USB host/controller to this port as
it may damage both the BDS system and the other device.
NOTE: This USB port is rated for 2.1A output, which suggests, it is certified
to charge iPad devices (as well as iPhone and iPod devices). There is a USB
connector on the rear panel as well with similar functionality, rated for 1A
to change iPhone and iPod devices.
4. Volume ring and power button
: volume can be adjusted by touching this
capacitive ring. Slide clockwise around the ring to increase volume, counter-clockwise
to decrease volume.
IMPORTANT: If at high volume levels the audio from the speakers begins to
distort, reduce the volume as prolonged distortion can damage the system.