Harman Kardon AVR 335 Owner'S Manual Download Page 38

Page: 38 / 56

will flash green to confirm each button press

as you enter commands.

NOTE:

While entering commands for Power On/Off of

any device during a macro sequence, press the

Mute

Button

. DO NOT press the actual Power button.

3. When all the steps have been entered, press the

Sleep Button

to enter the commands. The

red light under the

Input Selectors

will

blink and then turn off.

Example:

To program the Macro 1 button so that it

turns on the AVR 335, TV and cable box, follow
these steps:

• Press the

Macro 1 Button

and

Mute

Button

at the same time and then release

them.

• Note that the

Program/SPL Indicator

will

flash amber.

• Press the

AVR Selector

• Press the

Mute Button

to store the

AVR 335’s Power On command.

• Press the

VID 2 Input Selector Button

to indicate the next command is for “Cable
Power On.”

• Press the

Mute Button

to store the Cable

Power On Command.

• Press the

VID 3 Input Selector Button

indicate the next command is for “TV Power On.”

• Press the

Mute Button

to store the TV

Power On command.

• Press the

Sleep/Channel Up Button

complete the process and store the macro
sequence.

After following these steps, each time you press
the

Macro 1 Button

, the remote will send

the Power On/Off command.

Erasing Macro Commands

To remove the commands that have been pro-
grammed into one of the Macro buttons, follow
these steps:

1. Press the

Mute Button

and the

Macro

Button

that contains the commands you

wish to erase.

2. The

Program Indicator

will flash amber,

and the LED under the

AVR Selector

will

turn red.

3. Within ten seconds, press the

Surround Mode

Selector/Channel Down Button

4. The red LED under the

AVR Selector

will

go out, and the

Program Indicator

will turn

green and flash three times before it goes out.

5. When the

Program Indicator

goes out, the

Macro has been erased.

Figure 15

Programmed Device Functions

Once the AVR 335’s remote has been programmed for
the codes of other devices, press the appropriate

Input

Selector

to change the remote from controlling

the AVR 335 to controlling the additional product. When
you press any one of the selectors, it will briefly flash in
red to indicate that you have changed the device being
controlled.

When operating a device other than the AVR 335, the
controls may not correspond exactly to the function
printed on the remote or button. Some commands,
such as the volume control, are the same as they are
with the AVR 335. Other buttons will change their
function so that they correspond to a secondary label
on the remote. For example, the Sleep and Surround
mode selector buttons also function as the Channel Up
and Channel Down buttons when operating most TV
sets, VCRs or cable boxes. The Channel Up/Down
indication is printed directly on the remote. For many
standard CD players, cassette decks, VCRs and DVD
functions, the standard function icons are printed on
top of the buttons.

For some products, however, the function of a particu-
lar button does not follow the command printed on
the remote. In order to see which function a button
controls, consult the Function List tables on pages 41
and 42. To use those tables, first check the type of
device being controlled (e.g., TV, VCR). Next, look at
the remote control diagram in Figure 15. Note that
each button has a number on it.

To find out what function a particular button has for
a specific device, find the button number on the
Function List and then look in the column for the device
you are controlling. For example, button number 45
is the Direct button for the AVR 335, but it is the
“Favorite” button for many cable television boxes
and satellite receivers. Button number 31 is the Delay
button for the AVR 335, but the Open/Close button for
CD players.

NOTE:

The numbers used to show the button func-

tions in Figure 15 for the purposes of describing how
a button operates are a different set of numbers than
those used in the rest of this manual to describe the
button functions for the AVR 335.

Notes on Using the AVR 335 Remote With
Other Devices:

• Manufacturers may use different code sets for the

same product category. For that reason, it is impor-
tant that you check to see whether the code set you
have entered operates as many controls as possible.
If it appears that only a few functions operate, check
to see whether another code set will work with more
buttons.