ENGLISH
18
• Each time these buttons are pressed, the tone mode is
selected as follows :
OFF : To listen to a program source without the tone effect.
�
("DIR" indicator lights up.)
ON : To adjust the tone to your taste.
("DIR" indicator goes off.)
• Each time these buttons are pressed, the tone is selected
as follows :
→
BASS
↔
TRBL (treble)
↔
TONE ON
←
■
When the TONE is set to ON to adjust the tone (bass and treble).
• The tone level can be adjusted within the range of -12 ~
+12 dB.
• In general, we recommend the bass and treble to be
adjusted to 0 dB (flat level).
• Extreme settings at high volume may damage your
speakers.
• To complete tone adjustment, repeat the above steps 11
and 12.
• If the tone display disappears, start from the step 9 again.
11.
Press the
▲
/
▼
buttons to select the desired tone.
12.
Press the
◀
/
▶
buttons to adjust the selected tone
as desired.
10.
Press the
◀
/
▶
buttons to select the desired tone
mode.
Adjusting the tone (bass and treble)
9.
Enter the tone mode.
• The tone mode is displayed for several seconds.
NOTE : When the 6CH DIRECT INPUT is selected as an
input source, you can neither select the tone mode
nor adjust the tone.
AVR-134 2008.12.1 10:31 AM 페이지 18
