ENGLISH
17
• Be sure to switch off all the speakers.
• When listening to a DTS or Dolby Digital program source,
if the headphones are plugged in and the “SPEAKER A/B”
button is set to off, it enters the 2CH DOWNMIX mode
automatically. (For details, refer to “2 CH DOWNMIX
mode”on page 20.)
NOTE: Be careful not to set the volume too high when
using headphones.
When CD, DVD, HDMI 1~ 3, VIDEO 1~2 is selected as an input source
• Each time this button is pressed, the corresponding input
is selected as follows:
�
o(ptical)
�
c(oaxial) 1
�
c(oaxial) 2
A(nalog)
�
�
�
: When HDMI 1~3 is selected, the analog input cannot be
selected.
NOTES :
• When VIDEO 3, TUNER, USB IN, TAPE or 6CH DIRECT
INPUT is selected as an input source, the analog input is
selected automatically.
• When the selected digital input is not connected, the
"DIGITAL" indicator flickers and the analog input may be
automatically selected depending on the input source.
• The selected digital or analog input is automatically
assigned to the corresponding input source on the INPUT
setup menu. (For details, refer to “SETTING THE INPUT”
on page 36.)
• The sound from the component connected to the selected
digital input can be heard regardless of the selected input
source.
• “MUTE” will flicker.
• To resume the previous sound level, press it again.
DOWN
UP
4.
Select the digital or the analog input connected as
desired.
7.
To mute the sound.
8.
To listen with the headphones.
5.
Operate the selected component for playback.
• When playing back the program sources with surround
sound, refer to “ENJOYING SURROUND SOUND” on
page 20.
6.
Adjust the (overall) volume.
AVR-134 2008.12.1 10:31 AM 페이지 17
