Harley Benton Block-800B, User Manual

Page: 21 / 32

20 Housing fan.
21 [OUTPUTS]
2 × Speakon speaker outputs to connect suitable speaker boxes. The overall impedance of the connected load must
not fall below 4 Ω.
22 [SEND]
1/4" jacks output of the serial effects loop for connecting sound processors such as compressors, etc. The connection
can also be used as a line output, since the internal signal path is interrupted only by plugging a plug into the
[RETURN] input. The SEND signal is tapped behind the EQ.
23 [RETURN]
1/4" jack input of the effects loop for returning the processed signal.
24 [POWER]
IEC chassis connector for mains connection with fuse holder. To replace the fuse, carefully take out the fuse holder
with a small screwdriver, replace the defective fuse with a new one of the same type and push the fuse holder back in
until it snaps into place.
25 Mains switch to turn the device on or off.
Connections and operating elements
Block-800B
21