Harley Benton Block-800B, User Manual

Page: 19 / 32

18 [HIGH / LOW]
Switch for the sensitivity and impedance of the [INPUT] . When using passive instruments, this switch should be in the
HIGH position, otherwise the input level will not be sufficient to fully drive the amplifier. When using active instru-
ments, this switch should be in the LOW position, otherwise clipping and thus a pre-stage overload can easily occur,
resulting in very disturbing-sounding distortions.
19 [INPUT]
1/4" jack socket to connect an E bass.
Connections and operating elements
Block-800B
19