7
[D.I.]
Balanced DI output with MIC level for connection to a mixer.
8
[LIFT/GND]
This switch disconnects or connects the ground potential of the DI output and the device ground. In
[LIFT]
position
(released), the device ground is disconnected. This can possibly eliminate noise caused by ground loops, that may
occur when connecting the device to other grounded equipment. In
[GND]
position (pressed), the device ground is
connected.
9
[PRE / POST]
This switch determines where the DI signal is tapped. In
[PRE]
position, the signal is tapped before tone control and
compressor, in
[POST]
position behind it.
10
3.5 mm jack output to connect head phones.
11
3.5 mm jack input for connecting a line level player, e.g. MP3 player or mobile phone.
12
[LINE IN]
Volume control for the input.
Connections and operating elements
Block-800B
17
Summary of Contents for Block-800B
