Harken LokHead 500 KIT.US, Instruction Manual, Page: 24 / 29

24 ENGLISH 28-05-19
Winch LokHead 500 KIT.US (INLH500KIT.US)
MAINTENANCE
Wash
Wash winch frequently with fresh water�
Do not allow cleaning products or other caustic solutions to come into contact with winch, especially anodized, chrome-plated,
or plastic parts� Do not use solvents, polishes, or abrasive pastes on logos or winch stickers�
Maintenance Schedule
Winch must be completely overhauled, cleaned, and lubricated at least every 12 months� Maintenance of winches must be
carried out exclusively by trained personnel. Harsh environment and/or heavy use may require more frequent maintenance�
NOTE!
A formal inspection of the winch must be performed at least annually by trained personell. The
inspection should be recorded in an inspection and maintenance log.
HANDLING
Protect against extreme temperatures: less then -20° C or more then +50° C
Extreme heat may distort composite parts�
Extreme cold can cause the material to become brittle and cause the lubrication to congeal�
STORAGE
Store in clean/dry place
Avoid impact which could damage jaws and skirt; ensure good packaging when shipping�
NOTE!
Do not replace or modify winch with a part that was not designed for it.
WARNING!
Periodic maintenance must be carried out regularly. Lack of adequate maintenance shortens the
life of the winch, can cause serious injury and also invalidate the winch warranty. Maintenance of
winches must be carried out exclusively by trained personnel.
WARNING!
Remove auxiliary equipment from service if the equipment does not pass inspection or if there is
any doubt about the safety or serviceability of equipment.
WARNING!
Return the winch, auxiliary equipment, to the manufacturer or to a qualified service center if the
equipment is dropped or impact-loaded.
WARNING!
Repair the auxiliary equipment only in accordance with the manufacturer’s instructions.
WARNING!
Do not expose the software of the auxiliary equipment to flame or high temperature and carry the
equipment where it will be protected as it could melt or burn and fail if exposed to flame or high
temperature.