23
ENGLISH
28-05-19
LOWERING LOAD
To lower the load with one hand grasp the rope�
With the other hand, turn the knob (or Control Lever if installed) clockwise to allow the rope to slip on the winch drum and permit
a controlled descent� To adjust descent speed, manually control the speed at which the rope leaves the winch by holding rope
with arm out and bringing it in towards the winch drum�
To stop the descent, release the knob�
Winch LokHead 500 KIT.US (INLH500KIT.US)
1
st
Gear
Faster = Less Power
2
nd
Gear
Slower = More Power
5� Begin turning handle counterclock-wise� Gears engage
automatically depending on direction handle is rotated�
1
st
gear: rotate handle counterclock-wise� 2
nd
gear: rotate handle
clock-wise�
6� When the handle becomes difficult to rotate in 1
st
gear, reverse
the direction to engage 2
nd
� A higher power ratio makes a heavier
load easier to lift with the same effort�
NOTE!
The maximum input speed of the LokHead Winch is 60 rpm.
WARNING!
To lower the load, in case of difficulties,
unwind the rope, and reduce the turns
to not less than 2 wraps, until you have
the optimal configuration. Do not take
rope turns off winch drum until rope is
completely unloaded.