20
ENGLISH
28-05-19
USING THE DEVICE - CHECKING THE DEVICE BEFORE USE
Before and after every use, visually inspect the Winch LokHead and plate for signs of wear, damage or failure� If such signs are
present, do not use the device� If the worn or defective parts are not immediately replaced, the manufacturer will assume no
responsibility for resulting damage or accidents�
Check the movement of the rope grab cover�
Check that the rope grab knob is working by rotating the knob and
releasing it�
Winch LokHead 500 KIT.US (INLH500KIT.US)
WARNING!
Before each use, visuallly inspect the LokHead winch for signs of wear, damage or failure. If such
signs are present, do not use the device. if the worn or defective parts are not immediately replaced,
the manufacturer will assume no responsibility for resulting damage or accidents.
WARNING!
Before each use check winch base securely fastened to plate.
Failure to use correct number and length of mounting fasteners and/or failure to tighten them
correctly can result in winch pulling off suddenly and unexpectedly during high loads which may
cause load to drop, possibly resulting in severe injury or death.
WARNING!
Before each use check the winch drum cannot be turned by hand counter-clockwise.
WARNING!
Before each use inspect winch and self-tailing jaws for degradation, cracks, or wear that may affect
locking strength and operation. Check lifting rope to make sure that it is free from wear. If in doubt,
replace with a suitably strong rope.