![Harken INLH500KIT.US Manual Download Page 20](http://html1.mh-extra.com/html/harken/inlh500kit-us/inlh500kit-us_manual_4071177020.webp)
20
ENGLISH
05/15/2022
MAINTENANCE
Wash
Wash winch frequently with fresh water.
Do not allow cleaning products or other caustic solutions to
come into contact with winch, especially anodized, chrome-
plated, or plastic parts. Do not use solvents, polishes, or abrasive
pastes on logos or winch stickers.
Maintenance Schedule
Winch must be completely overhauled, cleaned, and lubricated at
least every 12 months. Maintenance of winches must be carried
out exclusively by trained personnel. Harsh environment and/or
heavy use may require more frequent maintenance.
WINCH LOKHEAD 500 KIT
INLH500KIT.US
NOTE!
A formal inspection of the winch must be
performed at least annually by trained personel. The
inspection should be recorded in an inspection and
maintenance log.
NOTE!
Do not replace or modify winch with a part
that was not designed for it.
WARNING!
PERIODIC MAINTENANCE MUST BE CARRIED OUT
REGULARLY. LACK OF ADEQUATE MAINTENANCE
SHORTENS THE LIFE OF THE WINCH, CAN CAUSE
SERIOUS INJURY AND ALSO INVALIDATE THE WINCH
WARRANTY. MAINTENANCE OF WINCHES MUST BE
CARRIED OUT EXCLUSIVELY BY TRAINED PERSONNEL.
WARNING!
REMOVE AUXILIARY EQUIPMENT FROM SERVICE
IF THE EQUIPMENT DOES NOT PASS INSPECTION
OR IF THERE IS ANY DOUBT ABOUT THE SAFETY OR
SERVICEABILITY OF EQUIPMENT.
WARNING!
RETURN THE WINCH, AUXILIARY EQUIPMENT, TO THE
MANUFACTURER OR TO A QUALIFIED SERVICE CENTER
IF THE EQUIPMENT IS DROPPED OR IMPACT-LOADED.
Handling
Protect against extreme temperatures: less than
-4°F or more than +122° F (-20° C - +50° C)
Extreme heat may distort composite parts.
Extreme cold can cause the material to become brittle and cause
the lubrication to congeal.
Storage
Store in clean/dry place
Avoid impact which could damage jaws and skirt; ensure good
packaging when shipping.
WARNING!
REPAIR THE AUXILIARY EQUIPMENT ONLY IN
ACCORDANCE WITH THE MANUFACTURER’S
INSTRUCTIONS.
WARNING!
DO NOT EXPOSE THE SOFTWARE OF THE AUXILIARY
EQUIPMENT TO FLAME OR HIGH TEMPERATURE
AND CARRY THE EQUIPMENT WHERE IT WILL BE
PROTECTED AS IT COULD MELT OR BURN AND FAIL IF
EXPOSED TO FLAME OR HIGH TEMPERATURE.