16
ENGLISH
05/15/2022
Using The Device - Checking The Device Before Use
Before and after every use visually inspect the LokHead Winch
and plate for signs of wear, corrosion, damage and failure. If such
signs are present, do not use the device. If the worn or defective
parts are not immediately replaced, the manufacturer will assume
no responsibility for resulting damage or accidents.
Check the movement of the rope grab cover.
Check that the rope grab knob is working by rotating the knob
and releasing it.
WARNING!
BEFORE EACH USE CHECK THE WINCH DRUM CANNOT
BE TURNED BY HAND COUNTER-CLOCKWISE.
WARNING!
BEFORE EACH USE CHECK WINCH BASE SECURELY
FASTENED TO PLA\TE.
FAILURE TO USE CORRECT NUMBER AND LENGTH OF
MOUNTING FASTENERS AND/OR FAILURE TO TIGHTEN
THEM CORRECTLY CAN RESULT IN WINCH PULLING
OFF SUDDENLY AND UNEXPECTEDLY DURING HIGH
LOADS WHICH MAY CAUSE LOAD TO DROP, POSSIBLY
RESULTING IN SEVERE INJURY OR DEATH.
WARNING!
BBEFORE EACH USE INSPECT WINCH AND SELF-
TAILING JAWS FOR DEGRADATION, CRACKS, OR
WEAR THAT MAY AFFECT LOCKING STRENGTH AND
OPERATION. CHECK LIFTING ROPE TO MAKE SURE
THAT IT IS FREE FROM WEAR. IF IN DOUBT, REPLACE
WITH A SUITABLY STRONG ROPE.
WARNING!
BEFORE EACH USE, VISUALLLY INSPECT THE LOKHEAD
WINCH FOR SIGNS OF WEAR, DAMAGE OR FAILURE.
IF SUCH SIGNS ARE PRESENT, DO NOT USE THE
DEVICE. IF THE WORN OR DEFECTIVE PARTS ARE
NOT IMMEDIATELY REPLACED, THE MANUFACTURER
WILL ASSUME NO RESPONSIBILITY FOR RESULTING
DAMAGE OR ACCIDENTS.
WINCH LOKHEAD 500 KIT
INLH500KIT.US
