background image

7

CLR Mooring Winch

Installation and Maintenance Manual - Mod.A

4. General advices

Intended use

The Compact Light Rectratable (CLR) Mooring Harken Winches are designed and manufactured to 
moor the sailing boats and the motor boats on which they are installed. 

For any other usage, contact Harken Italy Technical Service by e-mail: [email protected].

Improper use

- The Harken winch must not be used for purposes different from those outlined in “Intended use” 
chapter, or for purposes not mentioned in this manual or different from those mentioned.
- The Harken winch must not be used if unauthorized modifications or interventions have been 
carried out.
- Do not use the winch to divert a line (cross-sheeting).
- Do not apply to the winch loads greater than the MWL (Maximum Working Load) in dynamic 
conditions.
- Do not apply to the winch loads greater than the MHL (Maximum Holding Load) in static conditions.

NOTE!
See the User Manual for all details about the use of the winch. User manual is available in 
paper form, included into the packaging of the purchased winch, and available on our website 
www.harken.com.

5. Product identification

Top

Drum

Motor

This manual is destined for the following product versions:
- CLR Mooring Winch 600
- CLR Mooring Winch 1200
- CLR Mooring Winch 2500

Motor carter

Summary of Contents for CLR 1200




























































Reviews: