B1140 Winch
45
Maintenance
Esploded view
Once maintenance is finished, reassemble the winch following the sequence described above in reverse order.
Before closing the winch, make sure the drainage holes in the base of the winch are not obstructed.
If you use self-locking nuts to fix the base of the winch and they have already been unscrewed more than one, they must
be replaced.
Check that the 16 screws of the drum gear ring (fig. 40) and the screws in fig. 41 are correctly tightened.
WARNING!:
Position the pawls and springs correctly in their housing, as shown in the photographs below.
!
Fig. 42
Fig. 43
Fig. 44
Fig. 45
Summary of Contents for B 1140 Series
