6
46 Rewind ™ Radial Winch
Installation and Maintenance Manual
Procedure 1
To install the winch you must remove the drum and use bolts as described ahead.
Tools needed
One medium fl at-bladed screwdriver
A number 6 hex key
A number 3 hex key
To identify the various parts, refer to the exploded view at the end of this Manual.
Torque to apply when assembling
Install the winch on the deck in the position you have chosen, keeping in mind the limits described
on page 4 and using socket head (SH) bolts.
(See paragraph on installation)
1. Pull out the disconnect rod n°28
3. Slide off the assy socket n°37 and the cover n°38.
Pay attention to the o-ring in the socket.
2. Unscrew the central screw ( 2Nm/18 in-lb)
4. Unscrew the three screws n°19
( 4Nm/35 in-lb)
