06-02-10
Access Winch
5
4. Slide off hub (31) and cover (26).
3. Slide off central shaft (28).
2. Slide off bushing (30).
1. Remove ring (29).
C. PrOCEDurE 1
Installation
6. Remove self-tailing arm (26) by rotating and
lifting it.
5. Loosen the three screws (25)
(4Nm/35 in-lb)
To install winch you must remove drum. Use
five (5) M6 or
1
/
4
" Socket Head (SH) bolts into
tapped mounting plate. You may also use washers
and nuts (Steel Alloy, 12.9 Class) (ISO 898 part 1).
Tools You Will Need
One medium flat-blade screwdriver
Protective gloves
Torque to apply when assembling
Use either Procedure 1 or 2 to install winch. Use Procedure 1 to thread mounting screws into threaded holes in
mounting plate. You can also use washers and nuts. Procedure 2 takes less time but can only be used if you can
tighten nuts from behind mounting plate.
