05-17-10
Access Winch
3
Parts Description / use
WARNING!
Subjecting the winch to loads above the maximum working load can cause the winch to
fail or pull off the mounting surface suddenly, possibly resulting in severe injury or death.
A. uSE
This winch is designed to be used as a manually powered, rope-handling winch for lifting, lowering,
and pulling loads.
It is designed to be mounted with the base in a vertical plane so that the double-handle configuration
can be used in a pedestal-like action.
B. LIMITATIONS
Do not use:
• With wire rope
• With loads in excess of the maximum working load (MWL) of 280 kg for lifting persons.
• This product, as supplied by Harken, is considered to be applicable to general lifting operations and not
intended to lift persons. Should this product be incorporated into systems for lifting persons, it then
becomes “partly completed machinery” and, when appropriate additional safety devices are added,
must be certified for its intended application. Such systems would be classified as "machinery for lifting
persons" and would require separate CE marking. Alternatively such systems may be classified as
personal protective equipment and would be within the scope of the PPE Directive.
• With loads in excess of the MWL of 500 kg for lifting loads.
• With more than one person turning the handles at the same time. This can overload the system.
Self-Tailing
Stripper Arm
Handle
Locking
Knob
Winch
Drum
Self-Tailing
Jaws
Removable
Winch
Skirt
Winch
Base
Part No.
Description
40.2STAACCSH Access winch with handles with locking knobs
B10ACCS
Handle with locking knob
40.2STAACCS
Access winch without handles
1st Gear
Faster = Less Power
2nd Gear
Slower = More Power
