Harken 1130, User And Maintenance Manual

Page: 37 / 54

User and maintenance manual Winch 1130 – Mod.0 37
WARNING!
Do not replace or modify any part of the winch with a part that is not original.
Lack of adequate maintenance shortens the life of the winch and may cause
serious accidents and invalidate the winch warranty.
15.1 Internal maintenance procedure
15.1.1 Maintenance products
The maintenance products listed below must be used:
Strong threadlocker
– Green (i.e. LOCTITE
®
270)
Clean the parts and apply the product, spreading it all over the
thread as shown.
Assemble the parts and wait at least 45 minutes before use. To
remove screws sealed with threadlocker, you may need to heat
the parts to reduce the effect.
WARNING!
Do not apply this product to screws driven into
carbon components.
Medium threadlocker
– Blue (i.e. LOCTITE
®
243)
Clean the parts and apply the product, spreading it all over the
thread as shown.
Assemble the parts and wait at least 45 minutes before use.
Generally, for use on all screws, requires no heating before
removal.
Pawl Oil (Harken) - BK4521
Apply the oil to the parts indicated in the internal maintenance
procedure below, taking care to lubricate the surfaces
completely.
Rotate or slide the oiled parts to distribute the product in a
uniform way. Remember to oil the pawls and not to use grease
on them.