9
STEP 7 ATTACHING THE PIZZA OVEN TO THE STAND
— Place the Stand upright. With a Helper, put the Oven in position on top of the Legs, and make
certain that the holes in the Legs match the attaching threaded holes in the sides of the Oven.
Fasten the Oven to the stand with (4) M6x10 screws as shown in Fig. 8
STEP 8 INSERTING PIZZA STONE AND ROAST RACKS
— Locate the Pizza Stone (part 6) and the Pizza Stone wire support grid (part 7). This support
grid has wires to locate and hold the Pizza Stone in the correct position. Place the support
grid in the bottom of the pizza oven, just above the burner. You will see that there are 3 tabs
that extend from each side of the inside of the pizza oven. These are what the wire support
grid rests on.
Place the pizza stone (part 6) on the wire support grid. The pizza stone should sit into the wire
support grid so that the stone is positioned closest to the front of the pizza oven.
Next, place the (2) standard wire Cooking Grids (part 5) on the support shelves in the Pizza
Oven above the pizza stone as shown in Fig. 9
Fig. 8
Fig. 9
Your Gas Pizza Oven is now ready to use. PLEASE read the lighting instructions and use manual
carefully!
Summary of Contents for HK0526
Page 1: ...ASSEMBLY AND OPERATION INSTRUCTIONS GAS PIZZA OVEN g r i l l r o a s t s m o k e ...
Page 2: ......
Page 4: ......
