11
STEP 12
Locate: 2 x Grid Tracks (13), 1 x Wood Chip Box
Rack(9), 1 x Wood Chip Box(10) and 1 x Wood chip
box lid(11).
Tools Needed: None
Procedure:
— Install one Grid Track (13) in each of the
bottom holes located in the grid support for
both the left and the right hand sides of the
cabinet.
—The wood Chip Box Rack(9) can be slide into
the Grid Tracks(13).
—The wood chip box (10) sits in this rack over
the burner and the wood chip box lid (11) fits
on top of this.
STEP 11
Locate: 1 x Temperature Gauge, 1 x washer and
1 x wing nut. (please note that the washer
and wing nut are already attached to the
temperature gauge)
Tools Needed: None
Procedure:
-Attach the temperature gauge through the hole
in the middle of the upper door.
-Secure with washer and wing nut from the
inside of the door.
STEP 10
Locate: Door Latch Plate (17) and 4 x 10-24x1/2”
Screws.
Tools Needed: Phillips head screwdriver
Procedure:
—Attach each door latch plate (17) to the upper
and lower doors using 2 x 10-24x1/2” screws.
Each latch plate is fastened to the side of the
doors using two screws. Please note that each
door has one latch plate.
6
6