10
STEP 6
Locate: Two Side Handles [18], eight 1/4-
20x1/2” Screw [1a], and eight 1/4-20 Flange
Nuts [2a]
Tools needed: Philips head screwdriver and
a 7/16” wrench or pliers
Procedure:
— Use four 1/4-20x1/2” Screw [1a] and four
1/4-20 Flange Nuts [2a] to attach the
handle on the right side of the smoker
cabinet [1].
— Mount the other side handle [8] to the left
side of the cabinet [1] as shown. Use four
1/4-20x1/2” Screw [1a] and four 1/4-20
Flange Nuts [2a] to attach the handle.
— Securely tighten the screws.
STEP 7
Locate: The upper and lower doors (2) and (3)
Tools needed: None.
Procedure:
— Re-mount the smoker doors[2] and (3) to the
cabinet by positioning the pin in the hinges
welded to the smoker cabinet(1).
Step 8
Locate: The door handles 915) and 4 x ¼-20 flange
nuts. (Please note the ¼-20 flange nuts are
already located on the door handles and not in the
hardware bag.
Tools Needed: Shifter or 3/8” & 7/16 wrench.
Procedure:
— Attach each door handle (15) through the holes
in the front of the doors and secure with 2 x ¼-20
flange nuts at the back of the door.
Step 9
Locate: Door Latch Fastener (16) and 4 x 10-24x1/2”
screws.
Tools Needed: Phillips head screwdriver
Procedure:
— Attached each Door Latch (16) to the side of
the smoker cabinet using 2 x 10-24x1/2” screws
for each latch. Make sure that the handle faces
forward. The upper section of the cabinet door
has two latch’s and the lower door has one.